TYPE C Mother Seat Usage Notes

Attention point one

1. Do not reach out to the interface with your hands during the operation of the TYPE C motherboard to avoid being scratched by the pin chip. Moreover, after the earphone socket is powered on, do not touch the interface of the earphone socket with your hands, as it can easily cause safety accidents due to electric shock.

Attention point two

2. When working on the TYPE C bus, do not exceed the specified rated current. If the rated current is generally exceeded, it may cause accelerated aging of some components inside the USB bus. In mild cases, it may cause data transmission interruption or abnormal faults when using the USB bus. In severe cases, it may directly cause damage to the TYPE C bus and render it unusable.

Attention point three

Secondly, different specifications of the TYPE C mother seat cannot be easily replaced, as not all devices are compatible with certain specifications. Otherwise, once the TYPE C base is not applicable, it will result in damage to the TYPE C base not being used for long.

Attention point four

4. After each use of the TYPE C motherboard, be sure to unplug the USB plug, otherwise there will still be a certain amount of current at the earphone plug. Over time, it may cause the transmission chip of the TYPE C motherboard to age faster, which will affect the performance and use of the USB motherboard. Moreover, when the TYPE C mother seat is not in use, it is important to remember to cover the dust cover to avoid excessive dust accumulation, which can also affect the performance and use of the TYPE C mother seat.

Attention point five

5. The electrical strength of the TYPE C base, also known as withstand voltage, mainly refers to the voltage that the conductors in contact with the TYPE C base can withstand. So generally, the withstand voltage of the TYPE C bus base cannot be less than AC500V, otherwise the conductors between the USB bus bases will not be able to withstand the compatible load when the equipment is operating at a relatively high voltage, which may directly lead to the possibility of burning. Therefore, please pay attention to this when using the USB bus base.